Bobcat X Owner’s Manual www.drivemedical.com
VIII. ASSEMBLY & DISASSEMBLY
Your transport scooter can be disassembled into five sections without tools: the seat,
basket, battery pack, front section and rear section. Please be sure to follow these
steps to properly assemble and disassemble your scooter.
Step 1:
Loosen the knob securing the seat to the
seat post, and remove the seat.
Step 2:
Remove the rear cover over the
batteries, and remove the battery pack
by disconnecting the harness at the base
of the scooter and then lifting up on the
battery pack.
To Next Page
Loading...
Need help?
General
