Bobcat X Owner’s Manual www.drivemedical.com
Your scooter requires assembly prior to initial use. Please be sure to follow these steps
to properly set up your scooter.
Step 1:
Remove the battery cover by lifting up
on the left and right side of the cover
simultaneously.
Step 2:
Connect the batteries by inserting the
wire harness lead from the batteries into
the base of the scooter.
Step 3:
Insert the seat post into the base of the
scooter. Secure tightly with the provided
nut and bolt at the desired height.
VI. ASSEMBLY & DISASSEMBLY
To Next Page
Loading...
