Drive DeVilbiss - Transportation and Assembly; Inserting the Handlebars; Setting the Handlebar Height

transportation and assembly
1. Inserting the
Handlebars
Insert the handlebars in
to the frame as shown in
the photograph left.
Repeat for the other
handlebar.
2. Setting the
Handlebar Height
Set the handlebar to the
required height and
insert the screw A from
the tightening handle
through the hook B
bracket and the hole.
(There are two hooks to
attach an optional
basket )
Attach the plastic
washer and tightening
handle C on to the
screw. Rotate the
handle clockwise until it
secures the handle in to
position.
A
B
C