Drive Sunfire Plus EC - Speed Adjustment and Wheelchair Locking

11
5 . O P E R AT I O N
 Attention
We recommend that the first few times you operate your Sunfire Plus EC you turn the speed
and respond adjustment knob to the slowest setting until you become familiar with you new
power wheelchair.
◆ Speed / Profile Decrease Button
This button decreases the maximum speed setting or , if the control system is programmed for drive
profile operation, selects a lower drive profile.
◆ Horn Button
Press either button to sound the horn.

◆ Speed / Profile Increase Button
This button increases the maximum speed setting or, if the control system is programmed for drive
profile operation, selects a lower drive profile.
◆ Locking /Unlocking the power wheelchair
‧To lock the power wheelchair.
1. While the control system is switched on, depress and hold the on/off button.
2. After 1 second the control system will beep. Now release the on/off button.
3. Deflect the joystick forwards until the control system beeps.
4. Deflect the joystick in reverse until the control system beeps.
5. Release the joystick, there will be a long beep.
6. The power wheelchair is now locked.
‧To unlock the power wheelchair.
1. Use the on / off button to switch the control system on. The maximum speed / profile indicator
will be rippling up and down.
2. Deflect the joystick forwards until the control system beeps.
3. Deflect the joystick in reverse until the control system beeps.
4. Release the joystick, there will be a long beep.
5. The power wheelchair is now unlocked.