Drobo Elite - Page 3

Drobo How-To Guide
Migrating a Disk Pack Between Drobo iSCSI SAN Systems
drobo.com | Migrating a Disk Pack between Drobo iSCSI SAN systems
3
STEP 3
The IP address and other device settings such as the name are retained within the disk pack, so the destination
system will appear with the same name and IP address as it had in the source Drobo
Insert the disks from
source Drobo into the
new Drobo in any order.
Verify that all cables on
the destination Drobo
are plugged in and
power up the unit.
Drobo Dashboard
automatically discovers
the system.