Page 9
Wood Stove - Owener's Manual -
ENGLISH
2.2 Log Length
Logs should be cut at least 1" (25 mm) shorter than the
firebox so they fit in easily. Pieces that are even slightly too
long makes loading the stove very difficult. The most common
standard length of firewood is 16" (400 mm).
2.3 Piece Size
Firewood dries more quickly when it is split. Large unsplit
rounds can take years to dry enough to burn. Even when dried,
unsplit logs are difficult to ignite because they don’t have the sharp edges where the
flames first catch.
Wood should be split to a range of sizes, from about 3" to 6" (75 mm to 150 mm) in
cross section. Having a range of sizes makes starting and rekindling fires much easier.
2.4 Compressed Wood Logs
Compressed wood logs made of 100% compressed sawdust
can be burned with caution in the number of these logs
burned at once. Do not burn compressed logs made of wax
impregnated sawdust or logs with any chemical additives.
Follow the manufacturer’s instructions and warnings.
2.5 Drying Time
Firewood that is not dry enough to
burn is the cause of most complaints
about wood burning appliances.
Continually burning green or
unseasoned wood produces more
creosote and involves lack of heat
and dirty glass door. Firewood
with a moisture content between
15% and 20% will allow the stove
to produce its highest possible
efficiency.
To Next Page
Loading...
