Dromone Multi– Lock Quick Coupler
QMS 22 Dromone Multi– Lock Quick Coupler Author:EOD
REV: D - JAN2012 18 Approved:MS
Form No. B185 Rev A
EC DECLARATION OF INCORPORATION
We, Dromone Engineering Limited,
Dromone,
Oldcastle,
Co. Meath,
Ireland.
Declare that the following product:
Dromone __________________________(Product Name) Serial Number:_________________
_____________________(Type Model)
Is destined to be combined with other machines, and is in conformity with the provisions of the following
European Directives:
Council directive 2006/42/EC
And the following standards:
ISO 14121-1:2007 (replaces EN 1050)
EN ISO 12100-1:2003 +A1:2009 (replaces EN 292)
AS 4772-2008
EN474-1: 2006
Completed at Dromone Engineering Limited, Dromone, Oldcastle, Co. Meath, Ireland.
Signed: Martin Segarty………………………………………………..
Position: Product Manager………………………………….
Date: __ __ / __ __ / 20__ __
ATTENTION!
The attention of the specifier, purchaser, installer, or user is drawn to special measures and limitations to use which
must be observed when the product is taken into service to maintain compliance with the above directives. Details of
these special measures and limitations to use are available on request, and are also contained in the product manuals
To Previous Page
Loading...