Dromone Multi– Lock Quick Coupler
QMS 22 Dromone Multi– Lock Quick Coupler Author:EOD
REV: D - JAN2012 8 Approved:MS
•
Break out force is reduced at the
tip of the bucket due to the longer
distance from the pivoting area.
•
As can be seeing from
figure 2
above this is ideally the danger
zone and it follows a 360 degree
axis to the machine from the cen-
treline of swing. As well as this, the
working radius of the machine in-
creases due to the extra distance
between the bucket and the dipper
arm.
•
Maximum operating capacity is lim-
ited with the use of quick coupler.
Refer to excavator owners manual
for further information on max op-
erating loads.
20. Please note that under no circum-
stance, does Dromone engineering au-
thorize the transport of people with a
quick hitch, even if the quick hitch is de-
signed to do so.
To Next Page
Loading...