7
8
Quick Take-Off
-Start by installing and securing the LiPo battery in your drone.
-Place the drone in front of you (or "at noon" as the experts say), pointing in the same direction as
you.
-Once the radio control is activated, power up your drone. Wait for the flight control to initialize. The
radio control and the drone are paired in a few seconds.
- Now stand back at least 3m for safety and check your surroundings. If the area is clear enough,
you can switch on the motors!
Pre-flight inspection$
- Check that your propellers are properly installed.
- Check that the propeller guards are engaged so that they do not come off in flight.
- Also ensure that your camera is correctly installed.
- Check that the battery has been replaced after recharging.
8
To Next Page
Loading...