1. Clean full body harness with water and a mild soap solution. Do not use bleach or
bleach solutions. Wipe off hardware with a clean, dry cloth, and hang to air dry. Do
not force dry with heat. An excessive buildup of dirt, paint, etc. may prevent the
Drop Support harness from working properly, and in severe cases, degrade the
webbing to a point where it weakens and should be removed from use.
1. Store the Drop Support harness in a cool, dry, clean environment out of direct sunlight.
Avoid areas where chemical vapors or fumes may exist. Thoroughly inspect the full
body harness after extended storage.
To Next Page
Loading...