14 15
EN
EN
Congratulations with your purchase of the
Escape Ultrasonic Diffuser. Read the operating
instructions carefully before using. Keep these
instructions somewhere safe for future use.
1. Vapour outlet
2. Cover
3. Air-vent
4. Water reservoir
5. On/off button
6. LED indicator
7. Casing
8. Ventilation opening
9. Maximum water level
indicator
10. Ceramic plate
11. Electricity connection
12. USB cable
13. Ventilator
INSTRUCTIONS FOR USE
The Escape Ultrasonic Diffuser makes
use of ultrasonic technology that gen-
erates high-frequency sound waves to
vibrate the water in the reservoir, there-
by releasing an ultra-ne vapour. When
essential oils are added to the water,
ne particles from the oils are diffused
into the surrounding air, together with
the water vapour, creating a relaxing or
stimulating ambiance, depending on the
oil you use. The diffuser can be used in
a bedroom, a living room, a waiting room
or at the office, ...
Getting started
1. Screw open the lid and remove. Fig 1
2. Add water until the maximum level is
reached. Fig 2
3. Add 3-5 drops of essential oil. Fig 2
4. Replace the lid and screw it closed. Fig 3
5. Connect the diffuser to the electricity sup-
ply or USB port and press the on/off button
to activate the diffuser. Fig 4
6. To allow air to ow from the bottom of the
diffuser to the sides, it is important that
there is sufficient space in the holder used
around the device.
Use
Note: the remaining operational time availa-
ble and the amount of water in the reservoir
after the diffuser has been turned off can
vary as a result of climate, the surrounding
environment and other factors.
12
8
13
Fig 3
Fig 4
Fig 1
Power button
1 click on (continuous mode)
2 clicks intermittent mode
(9 sec. on, 9 sec. off)
3 clicks the diffuser is turned off
1
2
3
4
5
6
7
9
10
11
Fig 2
To Next Page
Loading...
Need help?
General