B
Benjamin RichAug 8, 2025
What to do if my DRS Technologies Tamarisk 640 Security Camera shows 'NO ATTACHED DEVICES FOUND'?
- NNicholas CameronAug 9, 2025
If your DRS Technologies Security Camera displays 'NO ATTACHED DEVICES FOUND', ensure the camera interface cable is correctly inserted into the 30-pin electrical interface on the camera and the break out box. If using USB, verify the mini-USB to USB cable is properly connected to the break out box and PC. For RS232 setups, confirm the external DC power supply is connected to the camera’s break out box and is turned on. Check that the communication cable (USB) is not damaged. Finally, if using a DC power supply, verify it's on, supplying the correct voltage, and providing enough current.