What to do if the Drummond Air Conditioner wind speed cannot be shifted?
If you cannot adjust the wind speed on your Drummond Air Conditioner, it may be because the unit is in AUTO or DEWET mode. In AUTO mode, the indoor unit automatically selects the air speed. The same is true for DEWET mode. Check the screen to see if either AUTO or DEWET is displayed.
What to do if the Drummond MVA-90CWN1-V ON/OFF display disappears after a while?
If the ON/OFF display disappears after a while on your Drummond Air Conditioner, it's likely because the set time on the timer has expired, causing the air conditioner to stop running. Check the timer settings.
Why does the TIMING ON display disappear on my Drummond MVA-90CWN1-V Air Conditioner?
The TIMING ON display disappears because the air conditioner starts running automatically when the set time is reached. Check whether the time set on the timer has expired.
What to do if the remote controller signal cannot be transmitted to my Drummond MVA-90CWN1-V Air Conditioner?
If the remote controller signal isn't transmitting to your Drummond Air Conditioner when you press the ON/OFF button, the batteries may be low. Check the batteries in the remote controller and replace them if necessary.
Why doesn't the temperature indicator light up on my Drummond MVA-90CWN1-V Air Conditioner?
If the temperature indicator on your Drummond Air Conditioner isn't lighting up, it might be because the unit is in Supply Air mode. In this mode, the temperature cannot be set. Check whether the mode marked on the screen is Supply Air.
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | 9000 BTU |
| Heating Capacity | 9000 BTU |
| Noise Level (Outdoor) | 50 dB |
| Dimensions (Outdoor Unit) | 700 x 245 x 540 mm |
| Weight (Indoor Unit) | 8 kg |
| Weight (Outdoor Unit) | 25 kg |
To Next Page
