21
Instruments
01
Starting prevented
Whenever the ignition is switched on, the
"Emissions fault: Starting prevented” message is
displayed.
To be able to restart the engine, contact a
dealer or a qualified workshop.
Power indicator (Hybrid)
The power indicator makes it possible to know in
real time the power requestedfromthe vehicle.
There are 3 zones:
POWER High power demand, using the
combined capabilities of the petrol
engine and the electric motor(s)
(depending on version).
The cursor is located in this zone during
more dynamic driving phases when
high levels of performance are being
requested.
ECO Optimal use of energy (internal
combustion or electric).
The cursor is located in this zone during
electric driving phases and during
optimal usage phases of the petrol
engine, accessible with suitable driving.
An indicator indicates the restart
threshold of the petrol engine. The
driver can therefore moderate their
acceleration to remain in electric
driving mode.
CHARGE Energy recovery for recharging the
traction battery.
The cursor is located in this zone during
deceleration phases: taking your foot
off the accelerator pedal or braking.
Charge level indicator (Hybrid)
The charge level of the traction battery and
the remaining range in electric driving mode
are permanently displayed when the vehicle is
switched on.
With the ignition off, opening the driver's
door activates the indicator.
Manual test
This function allows you to check certain
indicators and display the alerts log.
It can be accessed via the "Diagnostic /
Check" button in the Driving / Vehicle
touch screen menu.
The following information is displayed on the
instrument panel:
– Engine oil level.
– Next service due.
– Tyre pressures.
– Driving range associated with theAdBlue and
the SCR system (BlueHDi Diesel).
– Active alerts.
This information is also displayed
automatically every time the ignition is
switched on.
Total distance recorder
The total distance recorder measures the total
distance travelled by the vehicle since its initial
registration.
With the ignition on, the total distance is
displayed at all times. It remains displayed for
30seconds after switching off the ignition. It is
displayed when the driver's door is opened, and
when the vehicle is locked or unlocked.