149
Practical information
07
Cable type Compatibility Specifications
Mode3 charging cable
Identification labels C on the charging connector
(vehicle side) and on the socket (charger side).
Accelerated charging unit socket.
Charge limited to a maximum of 32A.
Wallbox accelerated charging unit.
The estimated charging time is indicated
on the instrument panel when the vehicle
is connected. It may vary depending on various
factors such as the outside temperature or the
quality of the electricity supply.
If the outside temperature is below -10°C, it is
recommended to connect the vehicle as soon
as possible as the charging time may increase
significantly. The traction battery may not
charge fully.
Domestic charging cable (mode2)
It is essential to avoid damaging the cable
and to keep it intact.
In the event of damage, do not use it and
contact adealer or a qualified workshop to
replace it.
Accelerated charging unit (mode3)
Do not dismantle or modify the
accelerated charging unit - risk of
electrocution and/or fire!
To find out how it is used, please refer to the
accelerated charging unit's user instructions.
Control unit (mode2)
Type 1