DS18 MRX2 - Installation and Mounting; Included Accessories; Mounting Using U Bracket

1. This player should be installed by a professional technician.
2. Please read the instruction and operation of the equipment carefully
before installing.
3. Make sure to connect other wires before power connection.
4. To avoid a short circuit. Please make sure all the exposed wires are
insulating.
5. Please fix all the wires after installation.
6. Please make the connection to the player accordingly to this instruction
manual. A wrong connection may cause damage.
7. This player only fits for a 12V DC device and please make sure your
boat belongs to this kind of cathode grounding electrical system.
8. Please connect the wires rightly. Wrong connection will cause
malfunction or damage the electrical system.
To mount the unit, you will need to find a flat surface with adequate
clearance behind it that provides enough clearance for the unit and all its
necessary wiring.
1. Once you have determined a mounting location, you will need to
cut a circular hole 3" {77mm) in diameter.
1. Main Unit
3. Screws X 2PCS
5. U Bracket
2. Power/Speaker Harness
4. Hex Head Screws X 2PCS
6. Instruction Manual
ACCESSORIES
INSTALLATION/ MOUNTING
MOUNTING (USING U BRACKET)
CAUTION
3