1. This player can only be used by the 12V DC cathode grounding
electrical system.
2. Do not connect the battery terminals until the player is fully assembled.
3. Please make sure to connect the yellow wire to the positive of the
battery(+).
4. When change the fuse. Please make sure the specifications are same.
5. Using good quality 4-2 ohm speaker can enhance the audio
performance of the system.
CAUTION
MEASUREMENTS
6
3.62” / 92mm
5.62” / 142mm
0.86” / 22mm
3” / 76mm
3.9” / 99mm
To Next Page
Loading...
