DS18 V6HL PRO - Internal Configuration; Output Summing Jumpers; Ground Isolation Selector; Internal Jumper Settings

4
V 6 H L PRO
#
W
E L
I
K
E
I T
L
O
U
D
These jumpers let you select the input signal that will be summed into the
main output. A LED light on the front indicates when the jumper is in the
summed position.
INSIDE VIEW
Factory Settings - Internal Jumpers
FACTORYJUMPERS
GROUND ISOLATION
SUMMING JUMPERS
Isolated
Separate
200 Ohms / Ground
Summed
OPTIONS
Output Summing Jumpers:
If the source unit and the amplifier are using different grounding setups, the
alternator may cause noise in the system. In order to prevent this,
you will find included alternative grounding connections. TURN OFF YOUR
SYSTEM BEFORE MOVING THE JUMPERS.
Ground Isolation Selector:
LINE
OUTPUTS
LED’s ON
when summed
SUMMED
SEPARATE
MAIN
SPEAKER INPUTS
CH2
ISOLATED
200
GROUND
GROUND ISOLATION