Need help?Do you have a question about the DSAN Limitimer PRO-2000T and is the answer not in the manual?
Configures audible cues and light blinking for timer events, with specific settings for yellow-to-red changes and red light blinks.
Details on selecting, pre-setting, and saving program configurations for debates or contests, including program interaction.
Guidelines for powering up to three signal lights from the base timer and extending their range with distribution hubs.
Configures timer roles (master/slave) and time counting formats (minutes/seconds or hours/minutes) for programs.
Sets the timer to count up or down and determines if the clock continues running after zero.
Adjusts sound volume, selects beep/ring/chime, and manages wireless transmitter settings for the PRO-2000BT.
Configures which timer programs (1-4) are displayed on individual signal lights via DIP switches.
Sets signal light behavior after zero, sound volume, sound selection, and whether top lights or digits are displayed.
Details on connecting signal lights using Cat-5 cables and options for network-based timer connections.
Lists various signal lights, cases, cables, adapters, and system extensions like the PRO-2000BT and IP-2000X.
Provides contact information for DSan Corporation, online resources for guides and Q&As, and warranty details.
To Next Page
General