To Next PageTo Next Page
Need help?Do you have a question about the DSC neo HS2032 and is the answer not in the manual?
General| Zones | 8 on-board, expandable to 32 |
|---|---|
| Partitions | 2 |
| Event Buffer | 500 events |
| Keypads | 8 |
| PGM Outputs | 4 |
| Wireless Zones | 32 |
| Power Supply | 16.5VAC/40VA |
| Communication | PSTN, IP, GSM/GPRS |
| Battery Backup | 7AH |
| Compatibility | Compatible with all DSC Neo devices |
Explains system status indicators like Ready, Armed, Trouble, AC Power, and common keypad actions.
Details system components, operation, CO detection, fire detection, and testing procedures.
Explains the meaning of icons, LEDs, and digits displayed on HS2ICN and HS2LED keypads.
Lists different PowerSeries Neo keypad models and their features like LCD, Prox. Tag, and wireless support.
Details system arming modes like Away, Stay, and Night, explaining their specific functions.
Covers keypad operations for infinite exit delay, Away, and Stay arming modes.
Explains Silent Exit Delay, Night Arming, and No-Entry Arming procedures.
Details how to use Quick Exit and arm the system using 2-way wireless keys.
Guides on bypassing zones, all open zones, and managing bypass groups.
Addresses arming errors, exit faults, and procedures for disarming the system.
Explains what happens when an invalid code is entered for disarming and how to correct it.
Details alarm sounds, types (Fire, CO, Intrusion), and procedures for handling alarms.
Instructions on how to reset smoke detectors after an alarm condition.
Explains the functionality and use of 2-way wireless keys and proximity tags.
Details how to use SMS for remote system control, including commands and responses.
Covers different user code types, menu access, code management, and label editing.
Guides on managing proximity tags, assigning partitions, and configuring additional user options.
Details system settings like event buffer, time/date, LCD, buzzer, voice, and auto arm.
Explains features for remote system servicing and installer access via DLS.
Adjusts volume levels for voice prompts and chimes on compatible keypads.
Guides on performing walk tests and understanding system trouble conditions.
Explains partitioning and how to temporarily loan keypads between partitions.
Explains how Fire and CO zone alarms affect partitions and keypad behavior.
Details features like door chime, audio/visual verification, system lockout, and command outputs.
Explains burglary verification, swinger shutdown, call waiting, and fire alarm verification.
Instructions for keeping the alarm controller in optimal condition, including cleaning.
Recommendations for locating smoke detectors and planning fire escape routes.
Fields to record system details like delays, enabled buttons, and contact information.
Reference sheets for user access codes and sensor/zone assignments.
Discusses potential system failures due to installation, criminal knowledge, or device limitations.
