To Next PageTo Next Page
Need help?Do you have a question about the DSC PC510 and is the answer not in the manual?
General| Partitions | 1 |
|---|---|
| Keypads | Up to 8 |
| Event Buffer | 128 events |
| PGMs | 2 |
| Power Supply | 16.5 VAC, 40 VA transformer |
| Backup Battery | 12V 4Ah |
| Weight | Approx. 2.4 kg |
Overview of the security system's capabilities and features.
Technical details and physical characteristics of the control panel and keypads.
Instructions for securing the main control panel unit to a wall.
Guidance on attaching the keypad to the wall for user access.
Details on connecting various wires to the control panel and keypads.
Default and function of the primary user access code for system control.
Code used by installers for system configuration and setup.
Procedures and considerations for arming the security system.
Explanation of automatic bypassing of interior zones when arming.
How to arm the system while remaining on the premises with instant alarms.
Steps to disarm the security system after entering the premises.
Defines operating characteristics for each zone, including response and type.
Configuration of system timing parameters like Entry and Exit Delays.
Setting and managing the installer's access code for programming.
Options for programming PGM outputs based on system events.
Setting system options using zone lights to indicate selections.
How to enable or disable various system functions via programming.
Procedure to restore the system's programming to its default factory state.
Important information for installers to convey to system users.
Potential reasons why an alarm system might not provide protection.
