Need help?Do you have a question about the DSC PC5132 and is the answer not in the manual?
General| Type | Wireless Receiver |
|---|---|
| Zones | 32 |
| Power Supply | 12 VDC |
| Compatibility | PowerSeries |
| Operating Temperature | -10 to 50 °C |
| Frequency | 433.92 MHz |
Instructions for installers to convey vital information to system users regarding warnings.
Importance of proper installation for adequate security protection.
Potential for criminals to develop techniques to reduce system effectiveness.
Ways intruders may bypass or interfere with system operation.
Impact of power interruptions on system operation and electronic equipment.
Potential for battery failure and the need for regular testing.
Interference affecting wireless device signals, including jamming.
Importance of user training for correct operation and response.
Reasons why smoke detectors may not properly alert occupants of a fire.
Limitations and potential impairments of motion detector operation.
Factors affecting the audibility and effectiveness of warning devices.
Potential issues with telephone lines used for alarm transmission.
Circumstances where response may not occur in time to protect occupants.
Possibility of system failure due to component malfunction.
Importance of regular testing and maintenance to find problems.
Alarm systems are not a substitute for insurance or prudent safety measures.
Guide on navigating and utilizing the manual for PC5132 installation.
Details on the PC5132's technical specifications and key features.
Lists the specific wireless devices compatible with the PC5132.
Information regarding the types of batteries used by the wireless devices.
Steps to check the contents of the PC5132 package.
Guidelines for selecting an optimal mounting location for the PC5132 module.
Information about the PC5132's antennas and their factory installation.
Instructions for wiring the PC5132 module to the control panel's Keybus.
Explanation of Electronic Serial Numbers (ESNs) and their role in device enrollment.
Step-by-step guide for enrolling wireless devices into the system.
Process for enrolling and configuring wireless keys for system control.
Features related to identifying and reporting actions by specific wireless keys.
Configuration of zones and their assignment to system partitions.
How to activate and manage supervision for the PC5132 module.
Procedure to enable or disable supervision for individual wireless zones.
Configuration for detecting and reporting RF jamming signals.
Setting the sensitivity levels for RF jamming detection.
Steps to restore PC5132 programming to factory default settings.
Method for removing enrolled wireless devices from the system.
Procedure for testing signal strength of wireless devices before permanent mounting.
Instructions for securely mounting the PC5132 receiver and wireless devices.
Overview of possible trouble conditions that may affect the system or devices.
Reference to jamming signal detection information provided in Section 4.4.
How the system indicates and delays reporting of low battery status for wireless devices.
Steps for replacing batteries in wireless devices and restoring system status.
Worksheet for recording wireless device serial numbers and zone assignments.
Worksheet for recording wireless key serial numbers and their assigned slots.
Reference table listing available functions for wireless key buttons.
Worksheet for programming wireless key functions for Partition 1 and Partition 2.
Worksheet for configuring the wireless supervisory window.
Worksheet for enabling/disabling supervision for zones 01 through 08.
Worksheet for enabling/disabling supervision for zones 09 through 16.
Worksheet for enabling/disabling supervision for zones 17 through 24.
Worksheet for enabling/disabling supervision for zones 25 through 32.
Worksheet for other configuration options, including RF jamming detection.
Worksheet for assigning wireless keys 01-08 to partitions.
Worksheet for assigning wireless keys 09-16 to partitions.
Lists conditions under which the product warranty becomes void.
Legal disclaimer regarding the scope and limitations of warranties.
Information and procedures for obtaining repairs for out-of-warranty products.
To Next Page
