DSC RF5132-433

Warning – This manual contains information on limitations regarding product use and
function and information on the limitations as to liability of the manufacturer.
Attention – Ce manuel contient des informations sur les restrictions concernant le
fonctionnement et l’utilisation du produit et des informations sur les restrictions en ce qui
concerne la responsabilité du fabricant. La totalité du manuel doit être lu attentivement.
Advertencia – Por favor consulte el Manual de Instrucciones del Sistema para más
información acerca de las limitaciones conrelación al uso y funcionamiento del producto e
información acerca de las limitaciones como la responsabilidad del fabricante.
Importante – Questo manuale contiene informazioni sulle limitazioni riguardanti l’uso e la
funzione del prodotto, ed informazioni circa i limiti di responsabilità del produttore. Si
consiglia di leggere attentamente l’intero manuale.
Instruction Manual
Manuel d'installation
Manual de instalación
Manuale d'installazione
RF5132-433
Version 5.0

DSC RF5132-433 Specifications

General

Brand	DSC
Model	RF5132-433
Category	Receiver
Language	English

Summary

Product Overview and Warnings

System Failures

Details various system failure modes and potential causes.

Limited Warranty

Outlines the terms and conditions of the product warranty.

RF5132-433 Set Up & Wiring

Connect the RF5132-433 Receiver

Step-by-step instructions for wiring the receiver to the system.

Receiver Programming

Enroll Wireless Devices Using Zones

Procedure for enrolling wireless devices to specific system zones.

Enroll & Program Wireless Keys

Steps for enrolling and configuring wireless key functions.

Other Programming

Program Zones and Partitions

Configuring system zones and partitions for wireless devices.

Enable RF5132-433 Supervision

Enable Supervision of Wireless Zones

RF Jam Detect Zone

Testing & Mounting

Test Reception of Wireless Devices

Verifying signal strength and device placement before mounting.

Mount RF5132-433 and Wireless Devices

Physical mounting procedures for the receiver and wireless devices.

Additional Notes

Trouble Conditions

Explains various trouble conditions that may occur with the system.

Jamming Signal Detection

Replacing Batteries in Wireless Devices

Troubleshooting

Troubleshooting LEDs and ESN Entry

Placement Test Issues

Common problems encountered during wireless device placement testing.