4
1.4 Compatible Wireless Devices
Please refer to the Instruction sheets of the following devices for more information.
The RF5132-433 v5.X can receive signals from the following devices:
• WLS904L-433 Motion Detector • WS4916 Smoke Detector
• WLS904PL-433 Pet Immune PIR • WS4938 Panic Button
• WLS906-433 Smoke Detector • WS4939 Wireless Key
• WLS912L-433 Glass Break Detector • WS4949 2-Button Wireless Key
• WLS914-433 Pet Immune PIR • WS4959 5-Button Wireless Key
• WLS919-433 Wireless Key • WS4969 Wireless Key with LED
• WLS925L-433 Mini Door/Window Contact
1.5 Safety Instructions
•This equipment shall be installed by Service Persons only (service person is defined as a person having the
appropriate technical training and experience necessary to be aware of hazards to which that person may be
exposed in performing a task and of measures to minimize the risks to that person or other persons). It shall be
installed and used within an environment that provides the pollution degree max 2, over voltages category II, in
non-hazardous, indoor locations only.
• Secure the receiver to the building structure before applying power to the alarm controller.
•Use at least two screws and/or adequate mounting means to secure the receiver to the building structure (e.g.
Screws # 6×3/4” flat Philips).
To Next Page
Loading...
Need help?
General
