12
Outputs
Your installer may have programmed these keys to perform various functions (reset smoke detector
after an alarm, open your garage door, etc.) To activate these functions, press Output and then press the
appropriate option. See also Sensor Reset on page 11.
Figure 11 - Outputs
Options
From the Options menu on the right side of the Touchscreen (see Figure 12 on page 12), the following
can be accessed:
• Access Codes
• Installer Menu
• User Functions
• Keypad Config
• Chime Enabled/Disabled
• Arming
• Partition Status
• Keypad Mode
Figure 12 - Options
To Next Page
Loading...
