DSC HS2TCHP v1.2

HS2TCHP v1.2 Touchscreen User Manual
Ecran tactile HS2TCHP v1.2 Manuel de l'utilisateur
HS2TCHP v1.2 Gebruiksaanwijzing aanraakscherm
HS2TCHP v1.2 Touchscreen Bedienungsanleitung
WARNING: This manual contains information on limitations regarding product use, function and information
on the limitation as to liability of the manufacturer. The entire manual should be carefully read.
MISE EN GARDE: Ce manuel contient des informations sur les limitations concernant l’utilisation et le fonc-
tionnement du produit ainsi que des informations sur les limitations et les obligations du fabricant Lisez attent-
ivement le guide complet.
WAARSCHUWING: Deze handleiding bevat informatie over beperkingen wat betreft productgebruik, functie en
informatie over de beperking van aansprakelijkheid van de fabrikant.
WARNHINWEIS: Dieses Handbuch enthält Informationen hinsichtlich der Einschränkungen bei der Verwendung
des Produkts und der Funktionen und Informationen zu den Einschränkungen bezüglich der Haftung des Her-
stellers.

DSC HS2TCHP v1.2 Specifications

General

Resolution	800 x 480 pixels
Compatibility	PowerSeries Neo, PowerSeries Pro
Power	12 VDC
Operating Voltage	12 VDC
Operating Temperature	0°C to 49°C (32°F to 120°F)
Display Type	LCD
Display Size	7 inches
Touch Technology	Capacitive
Humidity	93% RH, non-condensing

Summary

Safety Notes and Handling

Important Safety Instructions

Essential safety directives for equipment use and user protection.

Critical Warnings

Introduction to the Security System

System Operation and Detection

Specifications and Features

Emergency Key Functions

How to activate fire, medical, and panic alarm functions.

Arming and Disarming the System

Arming Modes and Exit Delays

Procedures for Stay/Away arming, silent exit, and entry delays.

Disarming and Alarm Handling

Steps to disarm the system and respond to alarm conditions.

System Troubles and Diagnostics

Trouble Conditions and Indicators

Identifying and resolving system trouble alerts and their causes.

Alarm Memory and Sensor Reset

Access Code Management

User Access Code Configuration

Setting, editing, and managing user codes and their attributes.

Proximity Tags and Partition Assignment

User Functions and System Tests

Time, Date, and Auto-Arm Settings

System Testing and Remote Access

Performing system tests and enabling computer access for service.

Managing Partitions

SMS Command and Control

SMS System Control and Commands

System Testing Procedures

Comprehensive System Testing

Guides for testing keypad, siren, and overall system functionality.

Safety Guidelines: Detectors and Escape Planning

Smoke Detector Placement Recommendations

CO Detector Placement and Fire Safety