Keypad Configuration
Chime Enabled/Disabled
Door chime: To turn the door chime function On/Off, tap the Chime icon. There are 3 beeps to indicate
that the chime is ON, 1 long beep to indicate the chime is OFF.
Arming
Stay Arm: arms the system in Stay mode
Away Arm: arms the system in Away mode
Night Arm: To fully arm the system when it has been armed in Stay Mode, press Night Arm button. All
interior zones will now be armed except for devices programmed as Night Zones. Night zones are only
armed in Away mode. This permits limited movement within the premises when the system is fully armed.
Ensure that your installer has provided you with a list identifying zones programmed as night 18 zones.
When the interior zones have been activated (i.e., Night Arm), you must enter your access code to disarm the
system to gain access to interior areas that have not been programmed as night zones.
Quick Exit: refer to the section: Quick Exit
Global Away Arm: arms all partitions to which the User Code is assigned, in Away mode.
Global Stay Arm: arms all partitions to which the User Code is assigned, in Stay mode.
No Entry Arm: arms the system with no entry.
Partition Status
To view the partition status, press Options, User Functions, then Partition Status. The keypad shows basic
status for up to 8 partitions, depending on the configuration of your system. Each partition is identified
along with its current status.
Figure 12- Partition Status
Keypad Mode
This option allows the HS2TCHP Touchscreen to function as a traditional DSC keypad.
- 27 -
To Next Page
Loading...
Need help?
General
