EasyManuals Logo
Home>DSC>Touchscreen>HS2TCHP v1.2

DSC HS2TCHP v1.2 User Manual

DSC HS2TCHP v1.2
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Additional Options
Figure 5- Zone Closed
Zone Status Indicators
Ready Zone is closed
Open The zone is open and needs to be closed
Bypassed Zones
Use the zone bypass feature when a zone is open but the system needs to be armed. Bypassed zones will not
cause an alarm when opened. Bypassing zones reduces the level of security. If you are bypassing a zone
because it is not functioning, call a service technician immediately so that the problem can be resolved and
your system returned to proper working order.
Ensure that no zones are unintentionally bypassed when arming your system. Zone bypassing can only be
performed while the system is disarmed. Bypassed zones are automatically canceled each time the system is
disarmed and must be bypassed again, if required, before the next arming.
Note: 24-hour zones can only be unbypassed manually.
Note: For security reasons, your installer has programmed the system to prevent certain zones from being
bypassed. (e.g., smoke detectors).
Bypassing Zones with a HS2TCHP
When in the Zone Status page, scroll up/down through the desired zones, and tap on the bypass icon to
bypass the zone. To unbypass a zone, tap the unbypass icon.
Note: For UL listed installations, zones can only be bypassed manually.
- 14 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DSC HS2TCHP v1.2 and is the answer not in the manual?

DSC HS2TCHP v1.2 Specifications

General IconGeneral
BrandDSC
ModelHS2TCHP v1.2
CategoryTouchscreen
LanguageEnglish

Related product manuals