Contact Us Via: support@dsoon-tech.com
Please contact us if you have any questions
◆ Installation
1) Install Battery
Please install batteries into the device before using.
1. Open the battery cover(11) on the back of the device.
2. Insert 6 x 1.5V AA brand Alkaline batteries into the battery
compartment. Make sure the polarity is correct.
3. Close the battery cover(11).
2) Inserting Memory Card
*There is a 32G Micro SD Card included in the package.
1. Open the card slot cover(2), you will see the card slot.
2. Insert the Micro SD card into the slot. Make sure the
direction is right. Never insert the card forcibly.
3. Format the Micro SD card, this can improve the
compatibility of the Micro SD card.