DSPeaker Anti-Mode 8033 cinema User Manual

Anti-Mode 8033 cinema
Anti-Mode 8033S-II
User's Manual
Revision History
Rev. Date Author Affected
chapters
Description
1.0 2007-11-30 TK & ToLi All Original version Finnish and English for 8033B
1.8 2012-02-15 POj All Updated for Anti-Mode 8033 cinema and 8033S-II
1.9 2012-03-18 POj All Typo and language corrections
2.0 2012-04-23 LMa All New layout, graphics

DSPeaker Anti-Mode 8033 cinema Specifications

General

Brand	DSPeaker
Model	Anti-Mode 8033 cinema
Category	Stereo Equalizer
Language	English

Summary

Document Revision History

Connections and Controls

Front Panel Controls and LEDs

Details the microphone jack, LIFT and BYPASS buttons, and status LEDs.

Back Panel Connections

Explains power input, line outputs, and line inputs for both models.

Quick Setup Guide

Preparation Before Calibration

Advises on subwoofer volume, filters, and microphone placement.

Automatic Calibration Process

Explains how to initiate and perform the automatic room correction process.

Post-Calibration Adjustments

Covers post-calibration sound changes, level adjustments, and AVR integration.

Subwoofer Placement Guidance

Guides on finding the best subwoofer location for optimal room correction.

Cross-Over Frequency Settings

Advises on selecting the appropriate crossover frequency for main speakers and subwoofers.

Using Multiple Subwoofers

Explains how to connect and calibrate multiple subwoofers for smoother response.

Wider Area Correction

Wider Area: Worst Response Point Strategy

Explains using a secondary calibration point to improve overall room response.

Wider Area: Gradient Compensation Strategy

Details a method for compensating room resonances using corner placement.

Basic Operation

Bypass Mode Operation

How to enable/disable processing and its effect on corrections.

Lifting EQ Modes

Explains the different EQ boost settings (Flat, Lift 15-25Hz, Lift 25-35Hz).

Subsonic Filter Only Mode

Details the mode that activates only the subsonic filter without EQ lifts.

20-30Hz Lift Mode (8033S-II)

Explains the 20-30Hz lift mode specific to the 8033S-II model.

Input Level Warning Indicators

Explains LED indicators for input signal levels and optimization.

Output Level Warning Indicators

Details LED indicators for output signal saturation and how to adjust.

Powering On and Off

Information on power transients and leaving the unit powered on.

Low-pass and Dipole Filters (8033S-II)

Explains using low-pass filters and dipole correction modes.

Filter Selection and Indicators

Filter Selection Mode Activation

Details the procedure for entering and navigating the filter selection mode.

Filter Mode LED Indicators

Explains the LED patterns corresponding to different filter and bypass modes.

Connection Examples

Connection Examples: Basic & Stereo

Illustrates basic home cinema and 2.1 stereo connection configurations.

Connection Examples: Multi-Sub & Shared

Shows examples for multiple subwoofers and shared system connections.

Frequency Response Graphs

Lift and Subsonic Frequency Responses

Displays frequency response curves for different lift and subsonic filter settings.

Low-pass Filter Responses (8033S-II)

Shows frequency response curves for various low-pass filter settings on the 8033S-II.

Dipole Correction Responses (8033S-II)

Displays frequency response curves for dipole correction modes on the 8033S-II.

Technical Specifications

Manufacturer Details

Contact Information