To Next PageTo Next Page
Need help?Do you have a question about the DSPeaker Anti-Mode 8033S-II and is the answer not in the manual?
Details the microphone input, LIFT and BYPASS buttons, and status LEDs on the front panel.
Describes the rear panel connectors for power, audio input, and audio output for both models.
Outlines essential preparation steps before initiating the room calibration process.
Provides a step-by-step guide for performing the primary room calibration.
Explains actions and adjustments to make after the calibration is completed.
Offers guidance on optimal placement of the subwoofer for best performance.
Discusses how to set the crossover frequency for effective subwoofer integration.
Details how to configure the device for systems with more than one subwoofer.
Improves room correction across multiple listening positions by targeting the worst spot.
Uses a gradient approach for broader room correction, focusing on axial modes.
Explains how to switch between processed and un-processed audio for comparison.
Details the different EQ boost settings (Flat, 15-25Hz, 25-35Hz, etc.) for bass enhancement.
Describes how the device alerts the user to potentially problematic input signal levels.
Explains the warnings for output signal saturation and how to address them.
Information on how to safely power the device on and off, including transient-free operation.
Guide for selecting low-pass filters to match main speaker capabilities.
Graphs illustrating the effect of Lift and Subsonic filters on frequency response.
Graphs showing the frequency response curves for various low-pass filter settings.
Graphs depicting the impact of dipole correction on the subwoofer's frequency response.
General| Brand | DSPeaker |
|---|---|
| Model | Anti-Mode 8033S-II |
| Category | Stereo Equalizer |
| Language | English |
