Modification should be performed only by qualified personnel.
Use only the supplied AC adaptor and the correct voltage. Be sure to use only
the AC adaptor supplied with the unit. Also, make sure the line voltage at the
installation matches the input voltage specified on the AC adaptor’s body.
Other AC adaptors may use a different polarity, or be designed for a different
voltage, so their use could result in damage, malfunction, or electric shock.
Use only the supplied power cord. Use only the attached power cord.
Also, the supplied power cord must not be used with any other device.
To reduce the risk of fire or electric shock, do not expose this appliance to rain
and moisture. The apparatus shall not be exposed to dripping or splashing
liquids.
Don’t place objects filled with liquids near / on the Dtronics equipment to avoid
exposure to liquids
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Clean only with dry cloth.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
To Next Page
Loading...