In
EDtT
CHASE
mode
them
are
8
fundun
ksys
Fe
[Fig.
'l
9
par
&l]
m
key:
Press
&is key
to
start the chase.
No@:
Keep
Master Dimmer Chase to the maximum see (par
6.72)
Re
key becomes
PAUSE
the display changes as shown in [Fig. 21 par
8,3]
PAUSE
key:
Press this key to stop the chase in the current position, pressing the key it
recovers from the same position.
SELECT
key:
Pressing this key it is possible the multiple selection of the chases. The display
changes as shown in [Fig.
19
par
6.31
Press one of the
1
+l
2
keys to select the chase
.
For successive chase
S
use the
PAGE
key.
REPEA
T
key:
P~ess this key to modify the number of repetitions of the chase
,
the value is in
number from
1
to
99
use the faders under the
REPEAT
writing, or the enco-
der.
Fcr confirm the modify press the
OK
key, for get out of the function press
the
ESC
key.
LENGTH
key:
Press this key to set how many scenes of the chase will execute, the value is in
number from
1
to
48
use the faders under the
LENGTH
writing, or the enco-
der. For confirm the modify press the
OK
key, for get out of the function press
the
EX
key.
MUSE
key:
Prr~ssing this key, and activating
MUSIC
ON,
the active chase will change the
scenes
to time of music, in the box of the chase and to the side at symbol play
the disp!ay shows a note.
Ths internal music sensor has an automatic gain adjustment which allows to
have
a
signal level good for the
Top
48
working.
I
be
inpilt music signal is a OdB mono/stereo so it could be taken from sound
sources like Mixer, CD, Dat etc.
STEPS
keys:
9-ressing this key you go in the step mode see par
6.5
To Next Page
Loading...