A
is
a
ply
of
lights, it is a sequence of steps
[M
'l
to
48
max].
To
create/modify a program follow all steps listed
hdw:
'i] If Top
48
is switched off, switch it on pressing
POWER
key.
21
Press
Chase
key to activate the
CHASE
function.
[the
Chase
led key will light up].
31
Press
1
+l
2
keys to select only the chase that you want to modify.
[only one chase highlighted].
For successive chase use the
P=
key
41
Press
STEPS
key to activate the
STEPS
function
51
Press one of the
1
+l
2 keys to select the step that we want
to
create/modify.
For successive steps use the
PAGE
key
7
Press the
EDIT
key to create/modify the selected step.
91
Modify the value of the channels through the 12 relative faders or the
'l
+'i
2
keys.
For next channels use the
PAGE
key
10;
When the step is completed it can be stored through the
SAVE
key.
1
'l
] Now Top
48
is again in the
STEPS
function in order that you can select another
step or copy the step already done in another one.
121
When the creation of the steps has been finished press
Chase
key to
come back to the
CHASE
function.
[the
Chase
led key will light up].
131
Finally you must press the
GO
key to execute the chase.
-
r
he chase is complete; to create/modify others repeat again all the above
steps.
To Next Page
Loading...