Need help?Do you have a question about the DTS XR 8 Spot and is the answer not in the manual?
General| Brand | DTS |
|---|---|
| Model | XR 8 Spot |
| Category | Flood Light |
| Language | English |
Precautions against fire hazards during operation and installation.
Warnings and procedures to prevent electrical shocks.
General safety measures for installation, handling, and operation.
Describes mounting options (floor/ceiling), supporting structures, and fixing methods.
Recommendation for using a safety cable to prevent accidental falls.
Recommendation for using a thermal magnetic circuit breaker and good earth connection.
Explains DMX signal connection, cable types, cascade connection, and error indicators.
Explains DMX channel modes (16/20) and provides example addresses.
Step-by-step guide to selecting the DMX address using the display and buttons.
Procedure for programming custom games and scenes using the REC mode.
Lists various error codes and their meanings for troubleshooting.
Calibrates the unit's motors electronically.
Step-by-step guide to replacing gobos in the rotating wheel.
DMX channels for Pan movement control (MSB and LSB).
DMX channels for Tilt movement control (MSB and LSB).
DMX channel and values for shutter control (black-out, strobe, pulse).
DMX channel and values for selecting colours and bicolours.
DMX channel and values for selecting gobos and rotation speed.
DMX channel and values for resetting lamp, motors, or total reset.
DMX channels for Pan movement control (MSB and LSB) in 20CH mode.
DMX channels for Tilt movement control (MSB and LSB) in 20CH mode.
DMX channel and values for shutter control in 20CH mode.
To Next Page
