To Next PageTo Next Page
Need help?Do you have a question about the Dual CS 618 Q and is the answer not in the manual?
General| 78 RPM | Yes |
|---|---|
| Motor | DC motor |
| Effective Tonearm Length | 230 mm |
| Overhang | 18 mm |
| Platter | Die-cast aluminum |
| Speed | 33 1/3, 45 RPM |
| Tonearm | S-shaped tonearm |
| Stylus | Elliptical |
| Frequency response | 20 Hz - 20 kHz |
| Wow and Flutter | < 0.1% |
| Power supply | 100-240 V, 50/60 Hz |
| Type | Belt drive turntable |
| Drive | Belt drive |
Defines the target audience for the manual, including setup, operation, cleaning, and disposal.
Highlights potential hazards and safety precautions using specific keywords like Danger, Warning, and Careful.
Lists compliance with relevant EU directives and standards, indicated by the CE mark.
Instructions for environmentally responsible disposal of packaging materials, warning about suffocation risk.
Guidance on proper disposal of the electronic device, promoting recycling and environmental protection.
Precautions for connecting and using the power supply unit safely, including voltage and plug handling.
Guidelines for safe placement to prevent damage or hazards like fire, electric shock, and moisture exposure.
Advises against self-repair and recommends qualified technicians, highlighting risks of electric shock.
Operational safety tips, including listening volumes and ensuring competent operation or supervision.
Specifies the intended use of the turntable for private homes and manufacturer liability for misuse.
Step-by-step guide for removing the turntable and accessories from packaging, with notes on small parts.
Enumerates all items included in the product package, advising to contact supplier if missing.
Instructions for safely packing the turntable for transport or storage, emphasizing secure placement of parts.
Steps to install the aluminum platter and platter mat correctly onto the turntable bearing.
Instructions for securing the tonearm at the rest, including removing protective wire and clip.
Guide on how to attach the removable headshell to the tonearm socket.
Steps for installing the counterweight onto the tonearm by screwing it on from behind.
Procedure to balance the tonearm for correct tracking force, ensuring stylus safety.
How to adjust the tracking force by turning the counterweight and reading the scale.
Instructions for setting the anti-skating force to compensate for skating force on the tonearm.
Steps for attaching the dust cover using hinges and receptacles onto the turntable.
How to connect the turntable to an amplifier via Phono or Line input.
Connecting to the amplifier's phono input, setting the switch, and connecting ground.
Connecting to the amplifier's line input, setting the switch, and connecting ground.
Guide for connecting the power supply unit to the turntable, including adapter fitting.
How to safely remove and attach the stylus guard before and after playing a record.
Step-by-step guide for playing records without the auto-stop function.
Step-by-step guide for playing records with the auto-stop function enabled.
Instructions for selecting the correct playback speed using the speed selector.
Guidance on how to replace a worn or damaged stylus, recommending original types.
How to clean the stylus and records using appropriate brushes for optimal playback and wear reduction.
Instructions for safely cleaning the turntable unit, warning against wet cloths and harsh chemicals.
Common issues like tonearm skipping or poor sound quality, with corresponding solutions.
