Need help?Do you have a question about the Dual CS 1264 and is the answer not in the manual?
General| Speeds | 33 1/3, 45 RPM |
|---|---|
| Platter | Aluminum die-cast |
| Stylus | Elliptical diamond |
| Output voltage | 3.5 mV |
| Frequency response | 20 Hz - 20 kHz |
| Weight | 5.5 kg |
| Drive | Belt drive |
| Type | Fully Automatic Turntable |
Procedures for unpacking and securing the turntable chassis.
How to attach and adjust the dust cover's spring-loaded hinges.
Connecting the turntable to the power supply and amplifier.
Guide to installing ULM and standard 1/2-inch cartridges.
Setting the mechanical anti-resonance filter for tonearm adaptation.
Reference table of cartridge compliance and mass for optimal setup.
Balancing the tonearm and setting the correct tracking force.
Setting the anti-skating force to prevent groove skipping.
How to play records using single-play and automatic start features.
Using the cue-control for starting, interrupting, and stopping playback.
Instructions for setting up continuous repeat and multiple record play.
Adjusting and verifying playback speed using pitch control and strobe.
Adjusting tonearm indexing and cue-control height.
Procedures for removing the platter and replacing the drive belt.
Guidance on stylus inspection, cleaning, and replacement.
Details on product warranty, service procedures, and authorized service.
To Next Page
