Need help?Do you have a question about the Dual CS 455-1 and is the answer not in the manual?
General| Drive System | Belt Drive |
|---|---|
| Speed | 33 1/3, 45 RPM |
| Platter | Aluminum Die-cast |
| Motor | DC motor |
| Overhang | 19 mm |
| Tracking Force Range | 1.5 - 2.5 g |
| Frequency Response | 20 Hz - 20 kHz |
| Tonearm | Straight |
| Stylus | Elliptical |
| Auto Functions | Automatic start/stop |
| Wow & Flutter | 0.1% |
Unpack unit and accessories, remove transport locks, fit platter, and attach hinges.
Connect mains set to socket 18 and audio cables to amplifier inputs.
Balance the tonearm precisely by turning the counterweight for free pivoting.
Set tracking force using the dial and antiskating value based on the provided table.
Use automatic start for 33/45 RPM records; speed is automatically selected.
Select speeds manually (33/45/78 RPM) and use cueing lever for gentle record placement.
Stop operation automatically or manually via switch or cueing lever.
Remove old cartridge, attach color-coded leads, and screw new cartridge onto head shell.
Use the mounting gauge to ensure correct stylus overhang for optimal playback.
Replace worn or damaged styli (DN 10/DN 167) to protect records and maintain sound quality.
To Next Page
