To Next PageTo Next Page
Need help?Do you have a question about the Dual CS 741Q and is the answer not in the manual?
Pickup connection diagram showing pin assignments.
Detailed explanation of the motor control circuit, speed, and pitch regulation.
Circuitry for detecting motor start-up conditions and torque load.
Circuit that compensates for speed drops caused by motor torque.
Quartz oscillator and phase comparator for precise speed control.
Synchronization during start-up to ensure stable motor speed.
Operation of the stroboscope circuit for speed indication.
Motor output stage and power supply section explanation.
Visual indication of operating states using LEDs.
Distributor board functions: rectification, filtering, and wiring.
Explanation of the start solenoid operation and sequence.
Functionality of the continuous play button.
Explanation of the stop solenoid operation and sequence.
Audio muting circuit for operational silence.
Procedure for aligning the LED scale with a voltage divider.
General notes on part numbers and cover removal.
Instructions for removing the base.
Instructions for removing the front panel.
Procedure for complete chassis removal.
Overview of tonearm and bearing assembly.
Procedure for removing the complete tonearm assembly.
Procedure for removing the tonearm from its bearing case.
Instructions for replacing the spring housing.
Procedure for adjusting tonearm bearings.
Adjustment point for the short-out contact.
Adjustment point for tonearm lift height.
Procedure for replacing the lift board.
General adjustment points for tonearm.
Adjustment of the tonearm set-down point.
Adjustment of the tonearm shut-off point.
Instructions for replacing the mains fuse.
General
