Need help?Do you have a question about the Dual CS 429 and is the answer not in the manual?
General| Drive System | Belt Drive |
|---|---|
| Speeds | 33 1/3, 45 RPM |
| Stylus | Elliptical |
| Auto-Stop | Yes |
| Motor | DC Motor |
| Overhang | 19 mm |
| Tracking Force Adjustment Range | 0-4 g |
| Frequency Response | 20 Hz - 20 kHz |
| Platter | Aluminum |
| Tonearm | Static Balanced |
| Phono Preamp | Built-in |
Crucial safety guidelines for connecting and operating the power supply.
Precautions to prevent damage and hazards related to turntable placement.
Warnings and prohibitions regarding self-repair and unit modification.
Procedure for achieving a horizontal balance for the tonearm.
How to set the correct tracking force for the installed pick-up.
Instructions for setting the anti-skating force to compensate for skating.
Guidance on connecting the turntable to amplifier phono or line inputs.
Instructions for connecting the turntable to the mains power.
Common operational issues and their recommended solutions.
To Next Page
