Need help?Do you have a question about the Dual CS 550 and is the answer not in the manual?
General| Type | Belt Drive |
|---|---|
| Platter | Aluminium Die-cast |
| Platter Material | Aluminum |
| Platter Size | 300 mm |
| Tonearm | Straight tonearm |
| Tonearm Balance | Static |
| Weight | 5.7 kg |
| Drive system | Belt Drive |
| Motor | DC Motor |
| Speed | 33 1/3, 45 rpm |
| Speeds | 33 1/3, 45 RPM |
| Wow and Flutter | <0.1% |
| Tonearm Type | Static balanced |
| Stylus | Elliptical |
| Frequency response | 20 Hz - 20 kHz |
| Signal-to-noise ratio | 70 dB |
| Channel separation | 25 dB |
| Power supply | AC 100 - 240 V |
Lists components, accessories, and guides for connecting power and audio cables.
Instructions for unpacking, fitting the platter, hinges, and cover.
Detailed steps for balancing the tonearm and setting tracking and antiskating forces.
Procedure for adjusting the overall height of the tonearm assembly.
Instructions for starting playback, selecting speeds (33/45), and operating the tone arm lift.
Procedure for safely turning off the turntable after use.
Steps for mounting, exchanging, and adjusting a pick-up cartridge system and headshell.
Recommendations for stylus checks, replacement, and potential damage from worn styli.
To Next Page
