Dual CS 1264 User Manual

Piease keop in mind that the stylus and cantilever are ne.
cessarily quite delicate in arder to provide quality perfor-
mance. They ae extremely sensitive to harsh handling, 2c:
cidental blows, etc. Take the cartridge in the holder to your
Dua) deaier for inspection of the stylus, (Removal of cartriage
holder is described abovel
Servicing
Your Dual has a limited warranty of wo years trom date of
purchase against manufacturing defects or faulty parts.
Should your unit require service, please write to our service
epartment {address on the back cover!, describing your
complaint.
During the warranty period, the Dual will be serviced without
ccharae under the conditions statad on the warranty card.
Note: Only factory-authorized service stations should service
the Dual, any servicing by anyone else will void our warranty
‘After it has been serviced, your turntable will be shipped back
to you
Technical data
Currant AC 50 or 60 Hz, changeable by changing metor pulley
Line voltage 115 or 230 V, changeable
Drive Qual 16:00le synchronous motor: precision flat belt for
flywheel drive
Power consumption approx. 8 watts
Starting time (to esch nominal speed) approx. 2.5 seconds at
33.3 rom
Power consumption
at 220 V, 50 Hz: approx, 75mA
at 117 V,60Hz: approx. 140. mA
Platter
Non-magnetic, detachable, 1 kg, 304 mm @
Platter speeds 23 1/3 and 45 rom
Automatic tonserm set-down coupled with speed adjustment
Pitch control variation 3t both platter soeeds
Adjustment
range
at
33
1/3
rpm
approx.
1
semitone
(6%)
‘Speed
contro!
with illuminated stroboscope for platter speeds 33 1/3 and
45 rom, 50 and 60 Hz
‘Sensitivity of the illuminated strobe for 0.1 % speed deviation
6 division markings per minute at 90 Hz,
7.2 division markings per minute at 60 Hz
Total wow and flutter
DIN £007 %
WRMS 30.04%
Rumble (according to DIN 45 500)
Unweighted 48 dB
Weighted 70.d8
Tonearm
Distortion-tree “ultratow-mass” aluminum tubular tonearm in
4-point gimbal bearing
Effective tonearm length 221 mm
Ottset angle 24° 4
Tangential tracking error 0.16°/cm
‘Tonearm bearing friction (roterrad to stylus tip)
0.07 mN (0.007 g)
Adjustable overhang 5 mm

Dual CS 1264 Specifications

General

Brand	Dual
Model	CS 1264
Category	Turntable
Language	English