5
Problem Cause(s) Solution(s)
Grill plates not heated when power and
thermostat indicator are both on.
1. Temperature control broken.
2. At least one heating element broken.
3. Overheat thermostat is activated.
1. Replace temperature control.
2. Replace broken heating element.
3. Reset the overheat thermostat.
Temperature cannot be controlled when
power is on, temperature controller is
on and thermostat indicator on.
Temperature control is broken. Replace temperature control.
Indicator not on when power on and
heating process normal.
Indicator is broken. Neon indicator may need replacing.
Power indicator not on when power on. 1. Power cut or abnormal power supply.
2. Fuse in plug has blown.
1.Check plug and power supply.
2. Change fuse.
If a problem occurs that does not appear on this table, stop using the grill and seek help from the manufacturer, a qualied
technician or an authorised dealer.
TROUBLE SHOOTING
If for any reason the unit over heats, a safety cut-out is automatically activated.
This can be reset manually by unscrewing the black cap on the back of the grill and pushing the reset button.
Contact a qualied technician or an authorised dealer if safety reset repeatedly needs resetting during normal use.
SAFETY RESET
To Next Page
Loading...
General