DualSaw CS 300 - Product Registration; General Safety Rules

PRODUCT REGISTRATION
To get informaon on product updates, special oers and warranty claims, regis-
ter your DUALSAW CS 300 on our website www.dualsaw.com
Here is what you will need:
• Sales Receipt
• Machine Serial Number (located on the handle of your saw)
GENERAL SAFETY RULES
WARNING!
Read, understand and follow all safety rules and operang instrucons in
this manual before using this product. Failure to follow all instrucons list-
ed below may result in electric shock, re and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WORK AREA
• Always keep your work area clean and well lit. Cluered benches and dark areas
invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence
of ammable liquids, gases, or dust. Power tools create sparks, which may ignite
the dust or fumes.
• Keep bystanders, children and visitors away while operang a power tool. Dis-
tracons can cause you to lose control.
ELECTRICAL SAFETY
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges &
refrigerators. There is an increased risk of electric shock if your body is grounded.
• Do not expose power tools to rain or wet condions. Water entering a power
tool will increase the risk of electric shock. If operang the power tool in damp
locaons is unavoidable, a Ground Fault Circuit Interrupter must be used to
supply the power to your tool. Use Electrician’s rubber gloves and footwear to
further enhance your personal safety in damp condions.
2
Serial Number