Ducar DM46S - Assembly

Original Instructions
ASSEMBLY
Assembling the handle
As shown in Fig 3&4
1. Fasten the lower handle to the device by using two blots and two small knobs on each
side.
2. Unfold the upper handle and fix it to lower handle by using the big knobs and the blots
on each side
NOTE: Make sure the rope guide is on the right handle, when you stand behind
the mower.
9
Fig 3
Fig 4
Fig 5
Clip
Tidy the connection cord
As shown in Fig 5
Fix the connection cord to the handle
With the cord clip. (supplied)