Ducati 748R - Brakes

60
E
Brakes
Front brake
With double floating drilled disc.
Material:
steel
Disc diameter:
320 mm.
Hydraulically operated by a control lever on right
handlebar.
Braking surface:
88 sq cm.
Brake calipers with separate pistons.
Make:
BREMBO
Type:
34-4 pistons.
Friction material:
TOSHIBA TT 2172
Master cylinder type:
PSC 15.
Rear brake
With fixed drilled steel disc.
Disc diameter:
220 mm.
Hydraulically operated by a pedal on R.H. side.
Braking surface:
25 sq cm.
Make:
BREMBO
Type:
32 - 2-piston
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 11.
Warning
Brake fluid can dissolve paintwork and cause
severe eye and skin injuries in the event of accidental
spilling. Wash the affected area with abundant running
water.