Need help?Do you have a question about the Ducati 749S and is the answer not in the manual?
General| Compression Ratio | 11.7:1 |
|---|---|
| Transmission | 6-speed |
| Final Drive | Chain |
| Clutch | Dry multiplate with hydraulic control |
| Frame | Tubular steel trellis frame |
| Rear Suspension | Progressive linkage with fully adjustable Showa monoshock |
| Front Brakes | 2 x 320 mm discs, 4-piston calipers |
| Rear Brakes | 245 mm disc, 2-piston caliper |
| Front Tyre | 120/70 ZR17 |
| Rear Tyre | 180/55 ZR17 |
| Engine Type | L-twin cylinder, 4 valves per cylinder Desmodromic, liquid cooled |
| Fuel System | Marelli electronic fuel injection |
| Max Torque | 83 Nm @ 8, 500 rpm |
| Front Suspension | Showa 43 mm upside-down fork |
| Front Wheel Travel | 125 mm |
| Rear Wheel Travel | 128 mm |
| Wheelbase | 1420 mm |
| Fuel Capacity | 15.5 liters |
| Max Power | 87 kW (118 hp) @ 10, 000 rpm |
Explains terms and conditions for motorcycle warranty coverage.
Explains warning symbols and notes used in the manual.
Provides essential safety guidelines for operating the motorcycle.
Details guidelines for safely loading the motorcycle and weight limits.
Locates and explains the motorcycle's frame and engine identification numbers.
Identifies and locates all motorcycle controls for operation.
Describes the functions and indicators of the motorcycle's instrument panel.
Explains the primary functions displayed on the LCD screen.
Explains the anti-theft system, its components, and operation.
Explains the operation of the ignition switch and steering lock.
Explains the clutch lever operation and adjustment.
Explains the front brake lever operation and adjustment.
Explains the gear change pedal operation.
Identifies the location of major motorcycle components and devices.
Explains how to open and close the fuel tank filler plug.
Provides instructions for using and checking the side stand.
Details how to adjust front fork settings like damping and preload.
Explains how to adjust rear shock absorber damping and spring preload.
Provides guidelines for breaking in the new motorcycle and engine.
Lists essential checks to perform before riding the motorcycle.
Guides on how to start the motorcycle's engine under various conditions.
Provides instructions and safety tips for effective braking.
Provides instructions and warnings for refueling the motorcycle.
Explains how to remove the motorcycle's fairing for servicing.
Guides on checking and adding coolant to the motorcycle's cooling system.
Explains how to check and maintain brake and clutch fluid levels.
Provides instructions on how to charge the motorcycle battery.
Guides on how to inspect the drive chain tension.
Details the procedure for replacing headlamp bulbs.
Guides on checking and topping up the engine oil level.
Explains how to clean and replace spark plugs.
Lists the dry and full load weight of the motorcycle.
Lists recommended fluids and capacities for top-ups.
Provides detailed technical specifications for the engine.
Details specifications for the front and rear brake systems.
Details the specifications and adjustments for front and rear suspensions.
Explains the procedure for reporting safety defects to NHTSA.
Offers advice on safe riding practices and motorcycle operation.
Emphasizes the importance of wearing protective gear.
Details the emission control system warranty terms and coverage.
To Next Page
