82
E
steel
Disc diameter:
320 mm
Hydraulically operated by a control lever on right
handlebar.
Braking surface:
79 sq cm
Make brake calipers:
BREMBO
Type:
34-4 pistons.
Friction material:
TOSHIBA TT 2172
Master cylinder type:
PR 18.
Rear brake
With fixed drilled steel disc.
Disc diameter:
240 mm
Hydraulically operated by a pedal on R.H. side.
Braking surface:
32 sq cm
Make:
BREMBO
Type:
34-2 pistons.
Friction material:
FERIT I/D 450 FF
Master cylinder type:
PS 11.
Performance data
Maximum speed in any gear should be reached only after
a correct running-in period with the motorcycle properly
serviced at the recommended intervals.
Max. speed (rider alone):
240 Km/h (749)
250 Km/h (749S)
Speed limits
Above is the maximum speed limit that can be reached
after the running-in period.
Important
Failure to comply with these limits releases Ducati
Motor Holding S.p.A. from any liability whatsoever for
resulting engine malfunction or reduced life-span.
Spark plugs
Make:
CHAMPION (749)
NGK (749S)
Type:
RG 4 HC (749)
CR 9 VX 749S)
Brakes
Front brake
With double semi-floating drilled disc.
Material:
To Next Page
Loading...
