EasyManuals Logo

Ducati DESMOSEDICI RR User Manual

Ducati DESMOSEDICI RR
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
81
E
Note
To replace the headlight bulbs, there is no need to
disconnect the main wiring harness from the headlight bulb
holder.
Note
Be careful to hold the new bulb at the base only. Never
touch the transparent body with your fingers or it will blacken
resulting in reduced bulb brilliancy.
Refitting
After replacing the burnt-out bulb, refit the cover and press it
against the lever to close it.
Replacing the parking light bulb
To gain access to the parking light bulbs (1), insert your hand
into the light support and extract the bulb holders from their
seat; turn the bulb ring nut (1) counter clockwise and extract
the burnt-out bulb.
Replace the burnt-out bulb.
On refitting, turn the bulbs (1) clockwise to lock them in
place.
1
fig. 72

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ducati DESMOSEDICI RR and is the answer not in the manual?

Ducati DESMOSEDICI RR Specifications

General IconGeneral
Displacement989 cc
Transmission6-speed
FrameTubular steel trellis
Front SuspensionÖhlins 43 mm upside-down fork
Seat Height830 mm (32.7 in)
Power200 hp (147.1 kW) @ 13, 800 rpm
Torque11.8 kgm @ 10, 500 rpm
Rear SuspensionÖhlins shock absorber
Front BrakesDual 330 mm discs, 4-piston calipers
Rear Brakes240 mm disc, 2-piston caliper
Dry Weight171 kg
Fuel Capacity15 L

Related product manuals