23
E
Rh switch (fig. 14.1)
1) ENGINE STOP switch, two positions:
position (RUN) = run.
position (OFF) = stop.
Warning
This switch is mainly intended for use in emergency
cases when you need to stop the engine quickly. After
stopping the engine, return the switch to the position to
enable starting.
Important
Stopping the engine using switch (1) when riding with
lights on and leaving the ignition key in the ON position, may
run the battery flat as the lights will remain on.
2) Button = engine start
1
2
fig. 14.1
To Next Page
Loading...
